Contact Us
| Nom.Size | D1 | D2 | D3 | H1 | H3 | R1 | R2 | Recommended Mold Tonnage Range | Material | HRC | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Tolerance | Size | Tolerance | Size | Tolerance | Size | Tolerance | |||||||
| 30 | 30 | +0.02 +0.00 | 45 | -0.03 -0.05 | 55 | -0.05 -0.1 | 10 | -0.02 -0.05 | 1 | 1 | 2000 | Graphite-Copper Bushing | None | |
| 40 | 40 | +0.03 +0.01 | 55 | -0.04 -0.06 | 65 | -0.05 -0.1 | 10 | -0.02 -0.05 | 1 | 1 | 3000 | Graphite-Copper Bushing | None | |
| 50 | 50 | +0.03 +0.01 | 70 | -0.04 -0.06 | 85 | -0.05 -0.1 | 12 | -0.02 -0.05 | 2 | 2 | 3000 | Graphite-Copper Bushing | None | |
| 60 | 60 | +0.04 +0.02 | 80 | -0.04 -0.06 | 95 | -0.05 -0.1 | 15 | -0.02 -0.05 | 2 | 2 | 4000 | Graphite-Copper Bushing | None | |
| 70 | 70 | +0.05 +0.03 | 90 | -0.06 -0.08 | 105 | -0.05 -0.1 | 15 | -0.02 -0.05 | 2 | 2 | 4000 | Graphite-Copper Bushing | None | |
| 80 | 80 | +0.06 +0.04 | 100 | -0.08 -0.1 | 115 | 60 | -0.05 -0.1 | 15 | -0.02 -0.05 | 2 | 2 | 6000 | Graphite-Copper Bushing | None |
| 90 | 90 | +0.06 +0.04 | 110 | -0.08 -0.1 | 125 | 60 | -0.05 -0.1 | 20 | -0.02 -0.05 | 3 | 3 | 6000 | Graphite-Copper Bushing | None |
| 100 | 100 | +0.06 +0.04 | 125 | -0.08 -0.1 | 140 | 80 | -0.05 -0.1 | 20 | -0.02 -0.05 | 3 | 3 | 9000 | Graphite-Copper Bushing | None |
| 110 | 110 | +0.06 +0.04 | 135 | -0.08 -0.1 | 150 | 80 | -0.05 -0.1 | 20 | -0.02 -0.05 | 3 | 3 | 9000 | Graphite-Copper Bushing | None |
| Specification Format:KJ-TS-B-øD1*H（Unspecified dimension tolerance: ±0.1; rough/through-hole diameter tolerance: +0.3 to +0.5） | ||||||||||||||
