Contact Us
| D1 | D2 | D3 | H1 | H2 | Recommended Mold Tonnage Range | Material | HRC | |
|---|---|---|---|---|---|---|---|---|
| Size | Size | Size | Size | Tolerance | ||||
| 50 | 35 | 40 | -0.5 -1.0 | 8 | 2000 | #45 | None | |
| 60 | 45 | 50 | -0.5 -1.0 | 8 | 2000 | #45 | None | |
| 80 | 55 | 70 | -0.5 -1.0 | 10 | 2000 | #45 | None | |
| 90 | 65 | 80 | -0.5 -1.0 | 10 | 2000 | #45 | None | |
| 100 | 75 | 90 | -0.5 -1.0 | 10 | 3000 | #45 | None | |
| 110 | 85 | 100 | -0.5 -1.0 | 15 | 3000 | #45 | None | |
| 120 | 95 | 110 | -0.5 -1.0 | 15 | 4000 | #45 | None | |
| 135 | 105 | 125 | -0.5 -1.0 | 20 | 4000 | #45 | None | |
| 145 | 115 | 135 | -0.5 -1.0 | 20 | 4000 | #45 | None | |
| Specification Format:KJ-SD-øD1*H1（Unspecified dimension tolerance: ±0.1; rough/through-hole diameter tolerance: +0.3 to +0.5） | ||||||||
