Contact Us
| H1 | H2 | H3 | H4 | D1 | H5 | H6 | H7 | C1 | M1 | M2 | Recommended Mold Tonnage Range | Material | HRC | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Size | Size | Size | Tolerance | Size | Tolerance | Size | Size | Size | ||||||
| 8.5 | 19.5 | 81 | 110 | -0 -0.1 | 25 | -0 -0.1 | 30 | 60 | 90 | 2 | 8 | 10 | P20H | 28-32 | |
| 10 | 24.5 | 91 | 130 | -0 -0.1 | 30 | -0 -0.1 | 35 | 70 | 105 | 2 | 8 | 12 | P20H | 28-32 | |
| 12 | 27 | 101 | 140 | -0 -0.1 | 35 | -0 -0.1 | 42.5 | 77.5 | 112.5 | 2 | 10 | 12 | P20H | 28-32 | |
| 15 | 24.5 | 111 | 150 | -0 -0.1 | 40 | -0 -0.1 | 40 | 80 | 120 | 2 | 12 | 12 | P20H | 28-32 | |
| Specification Format:KJ-FDBGDX-H1*H2*H3（Unspecified dimension tolerance: ±0.1; rough/through-hole diameter tolerance: +0.3 to +0.5） | |||||||||||||||
